Bruno Scooter Lifts

AVM offers a full line of wheelchair lifts and scooter lifts from Bruno Independent Living Aids. These sturdy mobility lifts for vans, cars, SUVs, and trucks are designed to make your life easier. Our professional staff has been trained to get you the scooter lift or wheelchair lift that will meet your needs, budget, and vehicle.

Bruno Scooter Lift

Model VSL-6000

This easy-to-use product lifts and stores your unoccupied scooter or powerchair inside your vehicle at the touch of a button. Simply connect the docking device, push a button on the hand-held pendant, and let your Curb-Sider do the heavy lifting for you!

Highlights:

Fully powered – makes lifting and storing your scooter or powerchair inside your vehicle virtually effortless (400-lb/181-kg lifting capacity)
Offset arm design – allows lifting/lowering behind, at the rear corner of, or on the side of the vehicle (near the rear wheel)
Fold-down lift head allows partial third-row seating access (where applicable) or cargo space and improved driver visibility when mobility device is not present (requires optional quick-release pins)
Docking device for your mobility device is included at no charge
Available for passenger or driver side of vehicle
Safe/Reliable – lifecycle- and strength-tested beyond industry standards
No structural modifications to your vehicle – can easily be removed for vehicle resale
Can reinstall in your next vehicle
Works with minivans, SUVs, CUVs, pickup trucks, and full-size vans (call to confirm compatibility)
Hundreds of custom, vehicle-specific mounting kits are available for an extra clean and precise installation

View Bruno VSL-6000 Brochure

Bruno Scooter Lift

Model ASL-250

This easy-to-use product lifts and stores your unoccupied scooter or powerchair outside your vehicle at the touch of a button. Simply roll your mobility device on the platform from either side, hit a button, and let the Meridian do the lifting for you. Scooters and powerchairs are automatically secured when lift is raised. Retractable belts are also available for securement.

Highlights:

Fully powered – makes lifting and storing your scooter or powerchair outside your vehicle virtually effortless – one-button operation
350-lb/160-kg lifting capacity
Safe/Reliable – independently tested for rough road conditions, 100,000-mile life, and environmental operating extremes
Drive on/off either side of platform – no reversing necessary
Platform automatically folds up when not in use
Automatically secures scooters and powerchairs when lift is raised
Retractable belts are also available for securement
Optional swing-away available to access rear vehicle hatch
No structural modifications to your vehicle – mounts to your vehicle’s class II or class III hitch receiver (not included)
Can reinstall on your next vehicle

Bruno Scooter Lift

Joey™ Vehicle Lift Model VSL-4000HW

This simple-to-use product lifts and stores your unoccupied scooter or powerchair inside your minivan at the touch of a button. Simply roll your mobility device on the platform from either side, hit a button, and let the Joey lift and store your mobility device for you. Securement belts are included for safety during transport.

Highlights:

Fully powered – makes lifting and storing your scooter or powerchair inside your minivan virtually effortless – one-button operation
350-lb/160-kg lifting capacity
Safe/Reliable – lifecycle-tested beyond industry standards
Drive on/off either side of platform – no reversing necessary
Includes securement straps for safety
No structural modifications to your vehicle – can be easily removed for vehicle resale
Can reinstall in your next vehicle
Many custom, vehicle-specific mounting kits are available for an extra clean and precise installation

View Joey™ Vehicle Lift Model VSL-4000HW Brochure

Bruno Scooter Lift

Model ASL-225 Out-Sider

The lightest-weight exterior vehicle lift designed to handle today’s popular travel scooters!
Lowest-profile design minimizes rear-vision obstruction
Industry-leading 145-lb/65.9-kg lifting capacity
The gas-spring assist provides easy “fold/unfold” of the lift platform, and the safety latch prevents unintentional lowering of the lift platform
Exclusive “lift mast angle adjustment” allows the installer to nest the Out-Sider Micro tight against the rear of the vehicle
Can be powered by the vehicle’s battery or with the optional Bruno Pow’rPac
Road- and laboratory-tested by a certified testing facility
Bruno’s R3 lift belt/motor combination provides “whisper quiet” operation and maximum reliability and durability
Convenient control arm lets you operate the lift from a safe distance
An ultra-strength strap system is used to secure the scooter to the platform; it’s easy to use and can be operated with one hand!

Bruno Scooter Lift

Model ASL-325 Space-Saver™ Vehicle Lift

The Bruno Space-Saver Vehicle Lift, Model ASL-325, is an exceptionally versatile take-apart lift designed to help store your scooter in vehicles with smaller trunks. The Space-Saver solves the problem of storing a scooter in smaller vehicles.
The Space-Saver is designed to fit closer to the interior trunk wall, providing a ‘tighter arc’ when manually swinging the scooter in/out of the trunk. This allows scooters to be stored in spaces that won’t work with more conventional lifts.
The Space-Saver is fully adjustable for height and length and raises scooters weighing up to 200 lbs./91 kgs. The Space-Saver is lightweight and assembly/disassembly can be completed in three simple steps, quickly and easily.
Can be powered by the vehicle’s battery or with the optional Bruno Pow’rPac.
The Space-Saver can be stored anywhere – in the trunk or inside the vehicle itself. And when an additional tower base installation kit is ordered, the Space-Saver can be used in more than one vehicle.

View Model ASL-325 Space-Saver™ Vehicle Lift Brochure

Bruno Scooter Lift

Model ASL-350 Offset Space-Saver™ Vehicle Lift

Gives you the flexibility to load a partially assembled scooter into the trunk of today’s smaller cars or those cars with “sloped-in” trunk designs. This lift features an offset outer arm, allowing you to more easily position your scooter.
Ideal for vehicles with trunks that previously were considered too small for lift installations. Now you don’t have to go without the benefit of a lift any longer, and there’s no need to consider the costly purchase of a different type of car.
Designed with a low-profile, outer arm to make storing your scooter even easier. All controls are located conveniently on top of the lift arm. Just press a button and eliminate the struggle of raising and lowering your scooter!
Can be powered by the vehicle’s battery or with the optional Bruno Pow’rPac.
Can be stored anywhere, in the trunk or inside the vehicle. It disassembles quickly and easily, requiring only three steps. When an additional tower base assembly is ordered, it can even be used in more than one vehicle.
Raises and stores many types of three- or four-wheel scooters weighing up to 200 lb.

View Model ASL-350 Offset Space-Saver™ Vehicle Lift Brochure

Bruno Scooter Lift

Scooter Lift Vehicle Lift Model ASL-400

Power raise/lower and manual rotate operation – makes lifting and storing your scooter inside your vehicle virtually effortless (200-lb/90-kg lifting capacity)
Lift folds down when not in use
Easy, one-button operation
Docking device for your mobility device is included at no charge
Safe/Reliable – lifecycle and strength-tested beyond industry standards
No structural modifications to your vehicle – can be easily removed for vehicle resale
Can reinstall in your next vehicle
Hundreds of custom, vehicle-specific mounting kits are available for an extra clean and precise installation
Sales, installation, and service provided by our factory-trained worldwide network of dealers

View Scooter Lift Vehicle Lift Model ASL-400 Brochure

Bruno Scooter Lift

Model VSL-900 Scooter-Lift II® Vehicle Lift

Ideal for raising and storing a fully assembled scooter or wheelchair into the driver or passenger (sliding) side door of minivans, as well as the passenger side door of full-size vans.
Requires very little arm strength, balance, or effort to use. It’s so compact that even when you use it in a minivan, there is still enough room for three passengers to sit comfortably in the rear seat.
Features an optional installation assembly that eliminates the need to drill holes in the floor of the vehicle. This allows easier removal when it comes time to transfer the lift in and out of a minivan.
Can be used for either three- or four-wheel scooters as well as manual-folding or power wheelchairs weighing up to 200 lbs/91 kg. The hand-held controller makes this lift simple and easy to use.
Powered by your vehicle’s battery, and all lift operations are automatic – just help guide the scooter or wheelchair into place. Can also power it with the optional Bruno Pow’rPac.

View Model VSL-900 Scooter-Lift II® Vehicle Lift Brochure

Bruno Scooter Lift

Model AWL-1600 Back-Saver™ Vehicle Lift

Simple to operate and does not require any manual lifting. Just fold up the wheelchair and roll it onto the platform. Turn the key to the ON position and depress the rocker switch to the UP position. Unloading the wheelchair is simple and trouble free.
Rated to handle most folding wheelchairs, with 22” or larger rear wheels, and features a 100-lb/45-kg weight capacity.
Fits a standard Class I hitch tongue or a Class II/III if an adapter is used. It also features a strong, tubular frame for structural rigidity and maximum durability.
Features a self-locking, hold-tite bar that’s designed to grip the chair firmly during transport, without marring its finish.
Meets state and federal DOT regulations for license plate illumination and visibility. It also includes an extra brake light for security and peace of mind.
Optional Pow’rPac power supply adds convenience for installation and operation.

View Model AWL-1600 Back-Saver™ Vehicle Lift Brochure

Out-Rider® Vehicle Lift Model PUL-1100

This incredible product lifts your unoccupied manual wheelchair, scooter or powerchair from the front door of your pickup truck and stores it in the bed for transport, all at the touch of a button. Simply connect the docking device, push a button on the hand-held pendant, and let your Out-Rider do the heavy lifting for you!

Highlights

Fully powered – makes lifting and storing your manual wheelchair, scooter, or powerchair in the bed of your pickup truck virtually effortless (350-lb/159-kg lifting capacity)
Outer arm design – a variety of outer arms are available to accommodate different length cabs so that you can drop your mobility device close to the front door (no need to walk to the back of the truck)
No bed cover required
Available for passenger or driver side of pickup truck
Safe/Reliable – lifecycle- and strength-tested beyond industry standards
No structural modifications to your truck – can be easily removed for resale
Can reinstall in your next pickup
Works with many different pickup trucks (ask your dealer for details)
Sales, installation, and service provided by our factory-trained worldwide network of dealers

Bruno Scooter Lift

Pow’r Topper™ Power Tilt Cap Model PCL-1900

This unbelievable product enables you to tilt the cap on your pickup truck from the cab, at the touch of a button, to allow bed storage for your manual wheelchair, scooter, or powerchair.

Highlights

Fully powered – the cap tilts up and down by pressing a button on the hand-held pendant
Safe/Reliable – designed for years of worry-free operation
No structural modifications to your pickup truck – can be removed for vehicle resale
Can reinstall in your next truck
Pre-assembled Ranch brand caps with Pow’r Topper framing are available through Bruno for a clean and precise installation
Works with a variety of pickup trucks (ask your dealer for details)
Sales, installation, and service provided by our factory-trained worldwide network of dealers